At Chadima Furniture &
Restoration, all our custom built projects are made from only
the very best hand picked pieces of lumber to insure that
ONLY the best possible lumber is used.
We change sources only
when we need to so that we can purchase top grade plywood and
solid wood. We shop all our suppliers for the best price as
well as the best looking wood. We can only offer top grade
lumber pricing, as that is all we buy.
power and hand tools we use in our shop are constantly being upgraded.
This is done to provide efficiency and keep your cost down.
We use a wide variety of pneumatic tooling, top of the line
epoxy and hide glues and the best fillers available. Building
a high quality piece of furniture, custom cabinetry or a beautiful
fire place mantel requires the very best saws and cutting equipment, sanders
and hand operated finishing tool.
Your project will only look as
good as the finish that protects it. That's why we only work with
"top of the
line" European conversion varnish and pre-catalyzed lacquers
Technologically advanced, environmentally
friendly finishes will make your new furniture or custom
project last for many generations to come. Rest assured that
we go to every effort to make sure your piece is
built solid, to look premier and last for years to come, so
you can pass it on with pride.
furniture or custom cabinetry can be designed by our staff, or to
your specifications. We take the time to talk with you in
your home or office to design what you want, or we can pre-draft a computer design of our own
to give you some ideas. We design and build cabinets such as:
entertainment centers, bookcases, bathroom vanities, computer
stations, kitchen cabinet additions, and more. We design and
build furniture such as: Home or office desks, coffee and end
tables, commodes, secretaries, specialized computer desks, and
All our custom built projects
get detailed sanding to remove all planer or saw marks. We
sand to the degree needed for the type of wood. Softer woods
require finer sanding than hard woods. We then stain by wiping
on a sealer-based stain, if the piece is to have color added.
Allowing the stain to dry is the next step. Now we apply one
of our three finishes by spraying, for a smooth result. (These
finishes are listed on our refinishing page) Sanding between
coats of finish is the next step to remove dust, prepare the
surface for the next coat, and fill the grain slightly when
finish is re-applied. After multiple coats have been applied,
we are done and your piece is ready for delivery.
Whatever your need, we will do
our very best to see to it that it is fulfilled in a timely
fashion, and produced in the highest of quality.